|
 KTOG Bulletin Board
 P-32
 P-32 Hammer Spring - Broken
|
 UBBFriend: Email This Page to Someone! |
next newest topic | next oldest topic |
| Author | Topic: P-32 Hammer Spring - Broken |
|
Lucent New Member Posts: 2 |
posted June 16, 2001 01:57 PM
    
I recently purchased a P-32. I have fired about 100 rounds through it with no problems until now. Last night with the P-32 in my back pocket I felt a strange click. Turns out that the end of the hammer spring at the bottom of the handle just snapped off while I was sitting there. Has anybody had problems with the hammer spring? Is there a different manufacturer of springs that I could use? Other than this problem I love the thing and it goes with me everywhere. :) Thanks in advance for your help. Lucent
|
|
J.R. Bob Dobbs Member Posts: 59 |
posted June 17, 2001 07:28 PM
That's a wierd problem I haven't heard before. KT will send you a new one free for asking; you might also have them send you the pin that the spring rides on. Maybe it had a bad burr in it, and cut through the spring. Since it's not a common problem, I'd have confidence that they'll send you good replacement parts. ------------------
|
|
Lucent New Member Posts: 2 |
posted June 17, 2001 08:21 PM
I plan on calling them Monday AM. It is wierd. The spring broke about 1/4 inch from the end at the bottom. Didn't seem to have anything to do with the pin. Must just be a bad spring. So far I love the P-32. Has been with me all the time since I bought it. I have felt a little naked this weekend and have been forced to carry my P-111. :) Lucent ------------------
|
All times are ET (US) | next newest topic | next oldest topic |
  |
|
Contact Us | The Kel-Tec Owners Group
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45c