KTOG Bulletin Board
  P-32
  hello

Post New Topic  Post A Reply
profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone! next newest topic | next oldest topic
Author Topic:   hello
brent31
New Member

Posts: 5
From:
Registered: Apr 2001

posted April 13, 2001 11:06 PM     Click Here to See the Profile for brent31   Click Here to Email brent31     Edit/Delete Message     Reply w/Quote   Search for more posts by brent31      
hi,
just got a p32.and i cant get the slide off
of the frame.help!!!!!!!!
thanks brent

------------------

IP Logged

JerryM
New Member

Posts: 3
From:Las Cruces, NM
Registered: Apr 2001

posted April 13, 2001 11:53 PM     Click Here to See the Profile for JerryM   Click Here to Email JerryM     Edit/Delete Message     Reply w/Quote   Search for more posts by JerryM      
brent31,
Are you saying that after you remove the assembly pin that the slide won't come off? I just recently got a P32 and don't know much about it, but mine comes apart easily by removing the assembly pin and then sliding the upper forward. Jerry

------------------

IP Logged

brent31
New Member

Posts: 5
From:
Registered: Apr 2001

posted April 14, 2001 12:29 AM     Click Here to See the Profile for brent31   Click Here to Email brent31     Edit/Delete Message     Reply w/Quote   Search for more posts by brent31      
yep! this is my second kel tec and there both
turning out to be pieces of crap.

------------------

IP Logged

moe
New Member

Posts: 3
From:Oregon
Registered: Apr 2001

posted April 14, 2001 11:12 AM     Click Here to See the Profile for moe     Edit/Delete Message     Reply w/Quote   Search for more posts by moe      
I know how you feel. My third one did the same thing and it turned out to be the extractor pin digging into the frame. I had to force the slide off to figure this out. I'm now on my forth. It woild be a great gun if it worked.

------------------

IP Logged

brent31
New Member

Posts: 5
From:
Registered: Apr 2001

posted April 14, 2001 11:24 AM     Click Here to See the Profile for brent31   Click Here to Email brent31     Edit/Delete Message     Reply w/Quote   Search for more posts by brent31      
thats what i thougth so i remove the extractor. and it still wont come off.

------------------

IP Logged

rv8
New Member

Posts: 20
From:Navarre, FL, USA
Registered: Jan 2001

posted April 14, 2001 11:39 AM     Click Here to See the Profile for rv8   Click Here to Email rv8     Edit/Delete Message     Reply w/Quote   Search for more posts by rv8      
I know you won't really want to wait until Monday, but calling Kel Tec would be the best bet. However, I'd also bet that someone here can help if you post a few more details about where the slide is stuck.

FWIW, I finally got my P32 working properly, after much hassle. It's a decent gun when it works, but the experience doesn't exactly leave me as a happy customer.

Good luck with it,

------------------
Rusty
G26, G36, G21, Kimber 1911, P32, Remington 870 Marine Magnum, Bushmaster AR-15

IP Logged

brent31
New Member

Posts: 5
From:
Registered: Apr 2001

posted April 14, 2001 04:43 PM     Click Here to See the Profile for brent31   Click Here to Email brent31     Edit/Delete Message     Reply w/Quote   Search for more posts by brent31      
thanks,
im going to call kel tech on monday.
thanks for the help
brent

------------------

IP Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | The Kel-Tec Owners Group

Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45c